You are here
Safety and Apparel
• Accessory to protect lenses from scratches and dust
• Designed for use with 3M Full Facepiece 6000 Series
• Also known as "tear away" or "peel-off" lens cover
• Recommended for use in painting applications
For protection when spraying pesticides and paint. Helps reduce exposure to organic vapors and mists associated with paint spray applications. Reusable – just replace cartridges and filters. Comfortable, soft and lightweight. Low profile on face for a wider line of vision.
• Respirator Type: Half-Face Mask
• Made in U.S.A.
Respirator is designed to protect you against latex paint and other odor. Chemical adsorbent removes odors. Lightweight, contour fit provides easy breathability. Respirator offers relief from latex paint odor, unpleasant smog levels and nonhazardous household odors.
3M™ LeadCheck™ Swabs provide an instant and very easy solution for lead detection. 3M™ LeadCheck™ swabs will work on most surfaces, instantly turning red when lead is present: RED MEANS LEAD™. 3M LeadCheck swabs are odorless, disposable, and non-staining.
Full face piece helps prevent paint overspray and dusts from getting in eyes. Helps reduce exposure to organic vapors and mists associated with paint spray, pesticide applications, solvents, and thinners.
• Replaceable cartridges and filters
• Kit contains: one facepiece, one pair 6001 cartridges, one pair 501 retainers, and two pair 5P71 filters
• Made in U.S.A.
NIOSH approved against certain organic vapors. Use with 3M Half and Full Facepieces 6000 Series and 3M Half and Full Facepieces 7000 Series with bayonet style cartridge holders. This cartridge, when used with 6000 and 7000 Series facepieces, provides respiratory protection from certain organic vapors at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces.
• Use with 3M Reusable Respirators
This classic disposable N95 particulate respirator is designed to help provide comfortable, reliable worker respiratory protection against certain non-oil based particles.
• Welded strap attachment
• Cushioning nose foam
• Adjustable noseclip helps provide a custom fit and secure seal
• Advanced filter material allows for easier breathing
• NIOSH Approved
Recommended for sanding and preparation before painting. The patented Cool Flow valve allows for easy exhalation and heat reduction for cool, dry comfort. NIOSH approved: N95.
This 3M Tekk Protection respirator with a Cool Flow Valve is lightweight and has a comfortable "M" nose clip.
• Recommended for sanding and preparation before painting
• NIOSH Approved: N95
• Made in U.S.A.
Professional use only for organic vapors and mists associated with spray painting or staining/finishing decks and wood floors. The patented Cool Flow valve allows for easy exhalation and heat reduction for cool, dry comfort. Kit contains one facepiece, one pair 6001 cartridges, one pair 501 retainers, and two pair 5P71 filters.
• NIOSH approved: OV/P95
• Cool FlowValve reduces heat, moisture and fogging
• Bayonet style cartridges for comfort
• Soft Silicone facepiece for comfort
• Cartridges and prefilters can be replaced
Kit contains 1 pair of 3MTM 6001 organic vapor cartridges, 501 retainer clips and 2 pair of 5P71 prefilters.
• Use with 3M 6200 or 3M 7500 series respirators
• NIOSH approved: P95
3M TEKK Protection Chemical Splash/Impact Goggles, worn to help protect eyes from certain airborne particulates and chemical splash, feature vents designed to help prevent liquids from entering the eye area. The headband is chemical resistant.
Recommended for relief from the irritating effects of common household dusts.
• Contour-fit
• Soft metal nosepiece adjusts closely over the bridge of the nose
• Not NIOSH approved
This Tack Protection disposable paint project respirator is used by professional for organic vapors and mists commonly associated with spray painting, lawn and garden pesticides, staining or refinishing decks and hardwood floors and many other applications. Featuring a balanced design for more comfort, swept back cartridges for improved visibility and organic vapor cartridges that are permanently attached. Provides at least 95-percent filter efficiency against solids and liquid aerosols as well as certain organic vapors. This lightweight, soft paint respirator is low profile on face for a wide field of vision. Replicable pre-filters for effective filtration, pliable face piece and disposable convenience.
• Kit contains 1 face piece, 1 pair 6001 cartridges, 1 pair 501 retainers and 1 pair 5P71 filters.
• NIOSH approved: OV/P95
Made of durable drill fabric and triple stitched seams. Side Hammer loop and double back pocket as well as a double rule pocket. 8.75 oz. Painter's Drill, 100% Cotton.
• Relaxed fit
• Multiple tool pockets & loops
• 10" Inseam
• Guiry's logo on back pocket
Matches Dickies other painter's wear. Corduroy collar coordinates with the plaid flannel lining. Triple stitched back. Bi-swing back. Inside pocket. Shell: 8 3/4 oz. Painter's Drill, 100% Cotton; Lining: 65% Cotton/35% Polyester Brushed Flannel.
• 100% Cotton Painter's Drill Fabric
• Bi-swing back for ease of movement
• Inside pocket
• Corduroy collar
• Brushed flannel lining
• Guiry's logo on front
Roomy bib tool pocket. Double rule pocket. Hammer loops. Triple stitched seams. Elastic shoulder straps allow ease of movement.
• 100% Cotton Painter's Drill Fabric
• Multiple tool pockets & loops
• Elastic shoulder straps
• Guiry's logo on back pocket
Durable drill fabric. Hammer loops on both legs. Double tool pocket on left leg holds cell phone or beeper. Wider, deeper rule pocket on right leg. Triple stitched seams. Extra-large back pockets. Fits easily over boots.
• Relaxed fit
• Multiple tool pockets & loops
• Fits over boots
• 100% cotton
• Guiry's logo on back pocket
These lenses and frames are designed to provide you with a great fit to keep the wind out, comfort for a long ride, and protection from flying objects. Plus these meet standards set by the American National Standards Institute (ANSI) for safety glasses.
• Shatterproof Polycarbonate Lenses
• UV400 Filter for Maximum UV Protection
• Scratch Resistant Coating
• Rubber Nose Pads
Green latex crinkle finish palm coat, knit back helps keep hand cooler longer, and abrasion resistant. As an ISO 9001:2008 certified company, all goods sold by SAS Safety Corporation are carefully manufactured, tested, inspected, checked and packaged by experienced workers, and are as free from defects as possible prior to leaving the factory.
Superior puncture and abrasion resistance, latex-free textured grip, beaded cuff, ambidextrous. As an ISO 9001:2008 certified company, all goods sold by SAS Safety Corporation are carefully manufactured, tested, inspected, checked and packaged by experienced workers, and are as free from defects as possible prior to leaving the factory.
Super-Soft Foam Ear Plugs Conform to the Inner Ear Canal. Noise Reduction Rate is 30. For almost three decades, SAS Safety Corporation has been manufacturing and supplying the Industrial, Automotive, Agriculture and Marine Industries with products and equipment designed to make workplaces safer. At SAS Safety Corporation we are dedicated to providing quality products that protect and preserve the most valuable resource on earth: people, As an ISO 9001:2008 certified company, all goods sold by SAS Safety Corporation are carefully manufactured, tested, inspected, checked and packaged by experienced workers, and are as free from defects as possible prior to leaving the factory. We offer a complete line of Respiratory, Hearing, Eye, Hand/Body protection products plus First-Aid Kits, Absorbents, Spill Containment and Safety Accessories.
• Swiveling Pivot Head Strap
• Lightweight
• Adjustable Pin lock Head Strap
• 4-Point Nylon Suspension
Superior puncture and abrasion resistance, latex-free, textured grip, beaded cuff, ambidextrous. As an ISO 9001:2008 certified company, all goods sold by SAS Safety Corporation are carefully manufactured, tested, inspected, checked and packaged by experienced workers, and are as free from defects as possible prior to leaving the factory.
For over 30 years, SAS Safety Corporation has been manufacturing products and equipment designed to make workplaces safer. They are dedicated to providing quality products that protect and preserve our most valuable resource: people.
Lightly powdered, excellent sensitivity, beaded cuff, economical latex protection, and ambidextrous. As an ISO 9001:2008 certified company, all goods sold by SAS Safety Corporation are carefully manufactured, tested, inspected, checked and packaged by experienced workers, and are as free from defects as possible prior to leaving the factory.
